Author Topic: LCR-T4 MTester v2.07 LCR Meter - Black Block Issue - How to program ATMEGA328P? (Read 33919 times) (Read 33919 times) 0 Members and 1 Guest are viewing this topic.

Supply voltage 10 V DC. 30 V DC Power consumption ≤ 10 mA 1) Voltage drop ≤ 2.2 V Continuous current I a ≤ 200 mA Protection class III Response sensitivity, typ.

2.6 mT Overrun distance, typ. 3 mm Hysteresis, typ. > 0.5 mT Reproducibility ≤ 0.1 mT 2) Reverse polarity protection ✔ Short-circuit protection ✔ Power-up pulse protection ✔ Ambient operating temperature –30 °C.

+80 °C Shock and vibration resistance 30 g, 11 ms / 10. 55 Hz, 1 mm EMC According to EN 60947-5-2 Housing material Plastic Connection type Cable with connector M8, 3-pin, 0.3 m Cable material PUR Conductor cross-section 0.12 mm² UL File No. NRKH.E181493 • 1) Without load. • 2) Ub and Ta constant.

Quote: Leader in high-end USB meter! Truly instrument-level accuracy!!! Safety warning!! This type of tester has multiple input and output ports. All interfaces are connected in parallel.

Only one input and one output are allowed to be connected at the same time. Some model testers support high-voltage fast charging. When the high voltage is triggered, there will be high voltage on the input and output ports. Do not connect any equipment with insufficient voltage resistance. Please confirm that the voltage is correct and then access the equipment. This will result in problems including but not limited to burning mobile phones, burning equipment, burning adapters, etc.

Free ex4 to mq4 decompiler software. This shop does not bear any responsibility! Big-screen purple-gold ZY1280 starts selling! A new generation of high-end flagship USB meter! Contains all the features of 1276. The new features are as follows: 10 times the CPU processing power of ZY1276!

1.8-inch ultra-narrow frame large color screen, the screen is bigger but the size is not much! Screen displays more information and more curves graphs! Independent MicroUSB power supply interface, 0V starting test! USB upgrade: USB connected computer drawing curve PD capture, DIY full screen boot screen! New current voltage power maximum and minimum value display! Added AUTO protocol to detect QC4 and PPS display!

Added QC4-PPS protocol 0.02V step trigger! Add QC to PD function! The new large blue ZY1276Plus enhanced tester starts selling! 0.01mA current resolution! Chinese and English bilingual interface! Type-C Power Delivery trigger detection, packet capture monitoring directly included without additional cost! It is not necessary to directly measure the E-Marker line with PD power!

QC2.0 QC3.0 QC4 FCP SCP AFC PD2.0 PD3.0 PPS VOOC DASH The full protocol fast charge triggers detection scams! Serious enthusiasts recommended USB meter! White7561 wrote: Hey.

Oh so the new model could convert QC type c to PD? Anyway on zy1276. I have some questions. So I’m trying to use my load dummy.

This one needs usb power to run. Could I just connect it to the meter while I use the output too for draining?

Will the meter reads both outputs usage? So basically. Type c input to ZY1276. Then on output I use both usb a and type c.

I went to Kampala over Xmas time, however and I was shocked to learn that the people of Uganda do not hate Amin. State of blood henry kyemba pdf files free.